Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Pitch bend
The pitch bend can realize tonal variation. You can increase the pitch by turning up the pitch bend and decrease
the pitch by turning down the same. When released, the pitch bend will go back to the center position, and the
pitch will return to the standard state.
Vibrato
When [ Vibrato ] is in the low position, the Vibrato function is disenabled. You can enable this function by
turning up the bar, and 'VIB' will show on the screen. The Vibrato function can add vibrato effect for the instru-
ments. You can increase or reduce the vibrator effect by tuning up or turning down [Vibrato].
Double-tone
When the double-tone function is enabled, "Double" will show on the screen. Under this mode, you can obtain
an overlaid tone effect. Press [Tone] to shift between Tone 1 and Tone 2 as needed, and the corresponding
"TONE 1" and "TONE 2" will show on the screen.
Keyboard splitting
When enabling the Split function, "Split" will show on the screen. 24 keys on the left will split from the key-
board, while the left keyboard zone will increase by one octave and maintain the original tone.
Touch
Press [Touch] to enable or disenable the touch function. This function is defaulted to be enabled, and "Touch"
shows on the screen. With this function, you may enhance the expression of the melody. It may accurately
reflect the force you need to apply on each note. The larger the force is, the louder the sound will be. When this
function is enabled, the sound will be equal regardless of what the force you apply.

Recording

Recording
Press [Record] to enable the recording function, and "Record" will show on the screen. Under this mode all
notes played will be recorded. The recorded notes will be cleaned upon recording or shutdown of the keyboard.
Stop recording
• When the storage is full, "Full" will show on the screen, and recording will stop automatically.
• During the recording process, you can press [PLAY] to stop recording and play the recorded notes.
• Press [REC] to disenable the recording function, and all recorded notes will be cleaned.
23

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis