Effect Control - Schubert Etude 450 USB Handbuch

Single chord
Press [Single] to enable the chord function, and "Single" will show on the screen. Under the rhythm activated
mode, you can play in the chord key zone (the 1st-19th key, from left) with single chord fingering to obtain au-
tomatic chord accompaniment; while under the rhythm disenable mode, you can play chord accompaniment
manually. Press [Single] or [Chord OFF] to disenable the chord function, and "Single" will disappear from the
screen.
Chord volume adjustment
Press [Chord Vol ] or [Chord Vol ] to turn up or turn down the chord volume. Press [Rhythm Vol ] and
[Rhythm Vol ] at the same time to reset to the default.
Chord Mat
During playing, you can press any of the Chord Mat buttons (1, 2, 3, 4) to add a section of broken background
chord to enhance the melody.

Effect Control

Transposing
With the transposing function, you can play music of other tunes with C-tune fingering method. Press [Trans-
pose ] to decrease the tone by half (minor second), and the tune in C-tune keyboard zone will change to B-
tune. Press [Transpose ] to increase the tone by half (minor second), and the tune in C-tune keyboard zone
will change to #C tune or bD tune. By pressing [Transpose ] twice, C-tune will shift to bB-tune; by pressing
[Transpose ] five times, C-tune will shift to F-tune. Press [Transpose ] and [Transpose ] at the same time
to reset to C-tune "0". Press [Transpose ] and [Transpose ] to adjust the level from "-6" to"6".
Tuning
You can press [TUNING ] / [TUNING ] to conduct fine pitch correction by adjusting the fine adjustment
level from "-99" to „99". Press the two buttons at the same time to reset to the default "00", and the it will
back to the normal standard keyboard. This function is quite useful for tune correction during band ensemble.
Sustain
Press [Sustain], "SUS" will show on the screen, and the sustain effect will be activated. Press [Sustain] again to
disenable the sustain function, and "SUS" will disappear from the screen.
22