Auto Rhythm; Auto Bass Chord - Schubert Etude 450 USB Handbuch

Auto Rhythm

Rhythm selection
This Keyboard provides 260 rhythms, from "000" to "259", for your selection, and the default rhythm is
"000". Press [Rhythm] to enable the rhythm selection function, and "RHYM" will show on the screen. Then
press the number buttons or the "+" / "-" buttons to select other rhythms:
Rhythm control
Rhythm enabling
Press [start/stop] to start accompaniment. When the rhythm function is inactivated, press [Sync], metronome
will flash on the screen. Then play any key in the chord key zone (the 1st-19th key, from left), the accompani-
ment rhythm will be activated.
Interlude
After the rhythm is activated, press [Fill-in] and an interlude will be automatically inserted into the rhythm .
Stop rhythm
During the accompaniment rhythm, press [Start/Stop] the stop the accompaniment rhythm.
Metronome
The metronome contains four tempos, 1/4, 2/4, 3/4 and 4/4, respectively. Press [Metronome] continuously to
select four tempos one by one. Press [Metronome] again to stop the tempo.
Tempo adjustment
Press [Tempo +] or [Tempo –] to increase or decrease the rhythm speed, and press the two buttons at the same
time to reset to the default.
Rhythm volume adjustment
Press [Rhythm Vol ] or [Rhythm Vol ] to turn up or turn down the rhythm volume. Press [Rhythm Vol ]
and [Rhythm Vol ] at the same time to reset to the default.

Auto Bass Chord

Fingered chord
Press [Fingered ] to enable the chord function, and "Finger" will show on the screen. Under the rhythm acti-
vated mode, you can play in the chord key zone (the 1st-19th key, from left) with fingered chord fingering to
obtain automatic chord accompaniment; while under the rhythm disenable mode, you can play chord ac-
companiment manually. Press [Fingered] or [Chord OFF] to disenable the chord function, and "Finger" will
disappear from the screen.
21