Basic Operation - Schubert Etude 255 LCD Bedienungsanleitung

Note: When using a headphone, do not turn up and keep the volume to the
maximum for a long time, which may cause hearing loss!
Mic Input and Audio Input
• Mic input: Connect a microphone(not included) to the MIC port to sing
while playing the keyboard.
• The Keyboard is equipped with a stereo input function. Sound signals
from mobile phone, MP3 player, computer and other audio devices can be
input into the keyboard system for playing. Firstly turn off the Keyboard,
connect one end of audio cable (not included) to the output port of an
audio device, and the other end to the AUDIO INPUT port on the rear
panel of the Keyboard, and then turn on the keyboard.

BASIC OPERATION

Ein/Ausschalten
Press [ POWER ON/OFF ] button, and the LED display will turn on and show
the current tempo "120". Then you may play the Keyboard as required.
Luminous keyboard
The keyboard is provided with luminous function, under the modes of playing,
training and playing demo song, the light hint will be provided. The luminous
function is defaulted to be enabled, press [KEY LIGHTING]to enable or
disenable the luminous function.
Master volume adjustment
Press [ACCOM VOL +] or [ACCOM VOL -] to increase or decrease the
accompaniment volume. Press [ACCOM VOL +] and [ACCOM VOL -]
simultaneously to reset to the default value.
Accompaniment volume adjustment
Press [ACCOM VOL +] or [ACCOM VOL -] to increase or decrease the
accompaniment volume. Press [ACCOM VOL +] and [ACCOM VOL -]
simultaneously to reset to the default value.
Timbre selection
The keyboard provides 255 timbres, from "000" to "254", for your selection.
When turning on the keyboard, the timbre selection function will be turn on
automatically. When under other states, press the [ TIMBRE ] button to enable
the timbre selection function, and "tnE" will show on the display. The timbre
EN
19