Making A Call; Volume Control - Aastra Matra M325 Handbuch

Important!
The earpiece of the handset may attract small ferromagnetic objects such as staples and pins, care
should be taken when placing the handset near these items.
Connection
1. Connect the curly cord to the handset and to the socket marked
underside of the telephone. Place the handset onto the cradle.
2. Connect the telephone line cord to the socket marked
a telephone network wall socket.
3. Lift the handset and listen for the dial tone. Your telephone is now operational.
4. Ensure the correct Recall time has been set for your system/network (ie: normally
100 ms for the UK/AUS, but 600ms for NZ). For further information please refer
to page 4: Technical Information.

Making a call

Dialling
1. Lift the handset or press
2. Dial the required telephone number. Once the call is answered the handset must
be lifted to continue your conversation.
Redial
1. Lift the handset or press
2. Press to redial the last number dialled. Once the call is answered the handset
r
must be lifted to continue your conversation.
Volume control
The Handset earpiece volume may be increased or decreased during a call. Press
increase, or to decrease the volume.
£
To adjust the speaker volume (hands free dialling/group listening) use
the underside of the phone.
Group listening
Group listening allows anyone in the same room as the base unit to hear both parties
and follow the conversation through the base units speaker.
The ongoing call is not affected and can continue via the handset.
The loudspeaker is turned On/Off using
The loudspeaker can also be used when dialling. Press
handset once the call is answered. Remember that there is a microphone in the handset only.
English
, dial tone will be heard.
.
.
, then dial the number and pick up the
on the
q
on the telephone, and to
T
3
to
$
on