Vitek VT-1479 BK Betriebsanweisung Seite 7

ENGLISH
Insert the dowels into the holes and screw in
3.
the screws (included) intended for the wall
mount holder (5) fastening.
Insert the holder (5) into the grooves on the
4.
wall mount holder (10).
Hang up the the wall mount holder (10) on
5.
the screws.
Put on the protective cover (9) on the blender
6.
attachment (6). Set the motor unit (4) with
the blender attachment (6) installed on the
wall mount holder (10), having fixed it in the
holder (5).
On the wall mount holder (10) you can fix
7.
the chopper bowl (16) and the gear (14) with
whisk (15).
Clean the unit before taking it away for stor-
8.
age.
Do not wind the power cord around the motor
9.
unit.
Keep the blender set away from children in a
10.
dry cool place.
DELIVERY SET
Motor unit – 1 pc.
Blender attachment – 1pc.
Geared lid – 1 pc.
Chopping knife – 1 pc.
Chopper bowl – 1pc.
Whisk gear – 1pc.
VT-1479 IM.indd 6
Whisk– 1 pc.
Measuring cup – 1pc.
Holder – 1pc.
Motor unit holder – 1 pc.
Fastening screw – 3 pcs.
Dowel – 3 pcs.
Instruction manual – 1 pc.
TECHNICAL SPECIFICTAIONS
Power supply: 220-240 V, ~ 50 Hz
Maximal power consumption: 400 W
The manufacturer preserves the right to
change the specifications of the unit without a
preliminary notification.
Service life of the unit is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and to
the Low Voltage Regulation (73/23 EEC)
6
25.05.2012 11:14:29