Vitek VT-1479 BK Betriebsanweisung Seite 5

ENGLISH
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE USING THE UNIT
Before using the unit, wash the blender-
–
attachment (6), the chopping knife (12), the
whisk (15), the chopper bowl (11) and the
measuring cup (8) with warm water and a
neutral detergent, then rinse and dry them.
Wipe the motor unit (4), geared lid (16) and
–
whisk gear (14) with a soft slightly damp
cloth.
Attention! Do not immerse the motor unit
(4), geared lid (16), whisk gear (14), power
cord and power plug into water or any other
liquids.
Do not put the attachments and bowls in a
dish washing machine.
Selection of attachment rotation speed
To select the attachment rotation speed
–
press and hold the On/Off button (2) and
rotate the speed control (1).
For operation at the maximal rotation speed,
–
press and hold the (3) "TURBO" mode but-
ton.
Non-slip base/lid
Put the non-slip base (7)/(13) on the measur-
–
ing cup (8)/ chopper bowl bottom (11).
You can use the non-slip base (7)/(13) as a lid
–
of the measuring cup (8)/ chopper bowl (11).
Note: Take the chopping knife (12) off when
storing food in the chopper bowl (11).
USING THE BLENDER
WARNING: before assembling make sure that
the power plug is not inserted into the socket.
Insert the blender attachment (6) into the
1.
motor unit (4), turn the blender attachment
(6) until bumping so that arrows on the motor
unit (4) and the blender attachment (6)
match.
Insert the plug into the socket. Blender is
2.
ready for operation.
Note: In case of unit transportation or storage
at low temperature it is necessary to keep it for
at least two hours at room temperature before
switching on.
Immerse the blender attachment (6) into the
3.
bowl with products, that you want to mix; you
VT-1479 IM.indd 4
can use the measuring cup (8) for it.
Select the required whisk rotation speed by
4.
pressing and holding button (2) or (3).
Attention! The blender can not substitute a
food processor. The blender is intended for
chopping/mixing of liquid and soft products.
If the products are difficult to process add
some water.
Before starting to chop/mix, we recommend
to peel fruit, remove inedible parts, such as
bones, and cut fruit into 2х2 cm cubes.
After you finish using the unit, take the plug
5.
out of the socket and remove the attach-
ment (6).
Attention!
•
Do not remove the attachment (6) during
blender operation.
•
In order not to damage the blades, do not
process too hard products such as cereals,
rice, spices, coffee beans, ice, frozen food.
USING THE WHISK
Use the whisk attachment (15) only to make
cream, biscuit dough or mixing ready desserts.
WARNING: before assembling make sure
that the power plug is not inserted into the
socket.
Insert the whisk gear (14) into the motor unit
1.
(4), turn the whisk gear (14) until bumping
so that arrows on the motor unit (4) and the
gear body (14) match.
Insert the whisk (15) into the gear (14).
2.
Insert the plug into the socket.
3.
Put the whisk (15) into the bowl with prod-
4.
ucts.
Select the required whisk rotation speed by
5.
pressing and holding button (2) or (3).
After you finish using the unit, take the plug
6.
out of the socket, disconnect the whisk (15)
from the gear (14) and remove the gear (14)
from the motor unit (4).
Attention!
• Do not use the whisk (15) to make tight
dough.
• Products should be put into the bowl
before switching on the unit.
Using the mini-chopper
The mini-chopper is used to chop different
products.
4
25.05.2012 11:14:29