Inserting The Input Boards And Output Boards - Sony CSP-5000E Bedienungsanleitung

Preparation
Inserting the Input Boards and
Output Boards
Insert the CSPB-510VC Input Boards (not supplied)
and CSPB-520VC Output Boards (not supplied) into
the system controller.
An input board inputs eight video signals, and an
output board outputs eight video signals.
The system controller is equipped with 16 slots for the
input boards and four slots for the output boards.
Insert the required number of boards.
Setting the jumber pins on the output
boards
Before inserting the output boards, set the jumper pins
on the output boards as follows, in accordance with the
slot number the board is to be inserted into.
Output board
10(EN)
Jumper pin
CN105
CN106
CN107
CN108
CN109
CN110
CN111
CN112
VB1
VB9
VB17
VB25
VB2
VB10
VB18
VB26
VB3
VB11
VB19
VB27
VB4
VB12
VB20
VB28
VB5
VB13
VB21
VB29
VB6
VB14
VB22
VB30
VB7
VB15
VB23
VB31
VB8
VB16
VB24
VB32
Jumper pins
Setting the jumper pins on the output boards
Slot 1 Slot 2
VB1 VB9
VB2 VB10
VB3 VB11
VB4 VB12
VB5 VB13
VB6 VB14
VB7 VB15
VB8 VB16
Slot 3 Slot 4
VB17 VB25
VB18 VB26
VB19 VB27
VB20 VB28
VB21 VB29
VB22 VB30
VB23 VB31
VB24 VB32