Climadiff CLS31 Gebrauchsanweisung Seite 40

Control panel dual zone : (CLS41MT/CLS56MT/CLS110MT)
Lock and unlock control panel
Unlock : press key A and hold it for 3 seconds to unlock the screen, icon H on screen
-
disappear .
Auto unlock : the screen will unlock automatically once alarm or error condition
-
Auto lock : unlocked for 15 seconds with no operation ,screen automatically lock
-
Checking actual temperature
The appliance designed to display setting temperature.To check cabinet's actual temperature, press
key A durring unlock status, the value M/D/E will turn to inner cabinet's actual temperature with flash
.pres key A again or no operation for 6 seconds,The value will turn back to setting temperature and
the screen will automatically lock with another 15 seconds no operation.
Note : actual temperature only indicate the appliance working condition, it will changed automatically
base on different cooling status and could not be adjusted
.Setting temperature
single zone (CLS31/CLS41/CLS63)
- Unlock the control panel
- Press the L key to increase the temperature by 1 ° C or 1 ° F
- Press the N key to reduce the temperature by 1 ° C or 1 ° F
- The temperature display will flash during adjustment, you can adjust the temperature between
5-20 ° C or 41-68 ° F.
Pres key A or no operation for 6 seconds to quit termperature setting MODE. Accordingly value stop
flashing and the screen will automatically lock with another 15 seconds no operation.
Dual zone (CLS41MT/CLS56MT/CLS110MT)
- Unlock the control panel
- Upper area:
- Press the C key to increase the temperature by 1 ° C or 1 ° F.
- Temperature display D will blink during adjustment, you can adjust between 5-12 ° C or
41-54 ° C.
- Once the maximum temperature is reached, the selection starts again with the minimum
temperature.
- Lower zone:
- Press the I button to increase the temperature by 1 ° C or 1 ° F.
- Temperature display E will flash during adjustment, you can adjust between 12-20 ° C or
40