Troubleshooting; Cleaning; Storage When Not In Use - Silvercrest STBA 6 A1 Bedienungsanleitung Und Sicherheitshinweise

Troubleshooting

If the keyboard cannot pair with a compatible iPad or does not respond to
keystrokes, proceed as follows:
♦ Check the battery charge level and charge the battery if necessary.
♦ Check whether the keyboard is switched on.
♦ Check whether the Bluetooth
♦ If you use several Bluetooth
disconnected. This may indicate that a previously paired device is in range.
♦ Make sure that the keyboard is no more than 8 metres from the iPad and that no
obstacles or electronic devices are located in between.
If the function keys on the keyboard have no function/the wrong function, check to see
if the correct keyboard language has been set (you will find a detailed description
of how to do this in the operating instructions for your iPad).
NOTE
► If you cannot solve the problem with the above-mentioned solutions, please
contact the Service Hotline (see section Service).

Cleaning

CAUTION!
Possible damage to the device.
There are no serviceable parts or parts requiring cleaning inside the keyboard.
Moisture can cause damage to the device.
► To avoid irreparable damage to the device, ensure that no moisture gets
into it during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the device.
♦ Clean the housing of the device with a lightly moistened cloth and a mild deter-
gent only.

Storage when not in use

♦ Store the device in a location which is clean, dry, dust-free and not in direct
sunlight.
♦ To ensure a long battery life, charge the battery at regular intervals.
STBA 6 A1
® interface is enabled on your iPad.
devices, ensure that any previous connection is
®
GB │ CY │
9 ■