Handling and operation
This section provides you with important information on handling and using the
device.
Positioning your iPad
The keyboard has an iPad stand
upright or horizontally (see Fig. A + B).
CAUTION!
►
If you position the iPad upright, ensure that it is secured by the two pins of
the iPad stand
Using the keyboard as a display protector
♦
Remove the iPad from the iPad stand
♦
Turn the iPad with the display facing down so that the home button is on the
right-hand side.
♦
Place the iPad on the keyboard so that it protrudes from under the rear retaining
pins and fold it down (see Fig. D).
♦
To remove the iPad, flip it upwards on the front recess of the keyboard.
Switching the keyboard on and off
♦
Set the ON/OFF switch
the Bluetooth
♦
Set the ON/OFF switch
deactivate the Bluetooth
Connecting to an iPad
Before you can use the keyboard, you must pair it with a compatible iPad.
♦
Activate the Bluetooth
devices. A detailed description of how to do this is to be found in the
®
tooth
operating instructions for your iPad.
♦
Switch the keyboard on using the ON/OFF switch
lights up for 2 seconds.
♦
Press the connect button CONNECT
tion for 3 minutes. The connection LED
connection is made.
♦
Select the entry STBA 6 A1 from the list of discovered devices on your iPad.
STBA 6 A1
in which you can stand the iPad either
(see Fig. B). Otherwise there is a risk of tipping over.
to the I position to switch the keyboard on and activate
function. The connection LED
®
to the 0 position to switch the keyboard off and
function.
®
function on your iPad and carry out a search for Blue-
®
(see Fig. C).
lights up for 2 seconds.
. The connection LED
, to activate Bluetooth
flashes at one-second intervals until the
discovery func-
®
GB │ CY
│
7
■