Troubleshooting - Silvercrest SFT 2.4 A1 Bedienungs- Und Sicherheitshinweise

It is necessary to repair the product if they have been
damaged in any way, for example, if the housing is
damaged, if liquid or objects have penetrated the device or
if the product has been exposed to rain or moisture .
Repair work is also required if the device is not working
properly or has been dropped . If smoke is produced, or
there are any unusual sounds or smells, turn the product
off immediately . In such cases, the product should not be
used until they have been inspected by authorised service
personnel . Only have the device repaired by qualified
personnel . Never open the housing of the product .
Only use a clean, dry cloth for cleaning the product and
never use any corrosive liquids . Use a slightly moistened
cloth and a mild cleaning agent to remove stubborn dirt .
˜ Troubleshooting
Problem
The
appliance
does not
respond
after
installation .
Solution
Option 1: Make sure that the batteries are
installed with the correct +/– polarities .
Option 2: Make sure that the nano
receiver 3 is properly connected to your
computer .
Option 3: Try a different USB port on your
system .
Option 4: Insert new batteries .
GB/IE 33