Herunterladen Inhalt Inhalt Diese Seite drucken

Setup Settings; Timer Setting; Eco Mode; Auto Shut Off - Sony FWD-40LX2F Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 114

Setup Settings

Setup
English
Language :
English
Español

Timer Setting

Français

ECO Mode:

Off
Italiano

Auto Shut Off:

Off
Deutsch
Advanced Setup
Information
All Reset
IP Address Setup
Speed Setup
Sel
:
:
Back:
Set
Language
Timer Setting
ECO Mode
Auto Shut Off
HDMI 1
Exit:
MENU
Select to display all on-screen settings in your language of choice: "English",
"Español", "Français", "Italiano", "Deutsch" or "
You can adjust time, display the built-in clock, or set the timer to make the display
power on/off at a predetermined time.
"Clock Set": Sets the time and the day.
"Clock Display": Displays the currently set time on the screen when set to "On".
"On/Off Timer": Sets the time at which the power is automatically turned on or off.
Note
If the built-in clock tends to lose time, the internal battery may be exhausted. Please contact
your authorized Sony dealer to have the battery replaced.
"Off": Select to view picture without the benefit of power saving.
"Low"/"High": Select to view picture with reduced power consumption. It also
enhances the black level.
"Picture Off": Select to turn off the picture. Audio stays on with your selected
volume setting.
"On": The display automatically enters the standby mode when a signal is not input
to the video or S Video input connectors for more than about 5 minutes. The display
automatically enters the power saving mode when a signal is not input to the HDMI
or RGB/component input connectors for more than about 30 seconds.
"Off": The display is not turned off automatically even when no signal is input to any
connector.
Tip
While in the standby mode, press the 1 POWER switch on the display or the POWER ON
switch on the remote control to turn the display on. In the power saving mode, the display is
turned on automatically when a signal is input.
To highlight an option and to change settings, press
F
f
G
g
/
/
/
.
Press
to confirm the selection.
The "Setup" settings include the following options:
".
29
GB
GB

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis