Setup Settings; Timer Setting; Status Display; Speaker Out - Sony FWD-50PX3 Bedienungsanleitung

Setup Settings

Language

Timer Setting

ECO Mode

Status Display

Speaker Out

28
GB
Select to display all on-screen settings in your language of choice: "English",
"Français", "Deutsch", "Español", "Italiano" or "
You can adjust time, display the built-in clock, or set the timer to make the display
power on/off at a predetermined time.
"Clock Set": Sets the day of the week and the hour of the day.
"Clock Display": Displays the currently set time on the screen when set to "On".
"On/Off Timer": Sets the time at which the power is automatically turned on or off.
Note
If the built-in clock tends to lose time, the internal battery may be exhausted. Please
contact your authorized Sony dealer to have the battery replaced.
"Off": Select to view picture without the benefit of power saving.
"Low"/"High": Select to change brightness and reduce power consumption.
"On" makes input signal and "Aspect" information appear on the screen for about 20
seconds when the display is turned on, and the input signal information appear for
about 5 seconds when the input signal is switched, while "Off" disables display of
status information.
Tip
You can display the input signal and "Aspect" information by using DISPLAY on the remote
control regardless of the "Status Display" setting.
"On": Enables sound to be emitted from the speakers.
"Off": Disables sound to be emitted from the speakers.
Note
When "Speaker Out" is set to "Off", "Sound Mode" and "Sound Mode Adjust."
cannot be selected.
To highlight an option and to change settings, press
F f G g
/ / / .
Press to confirm the selection.
The "Setup" settings include the following options:
".