Manual Navigation (Without Vacuuming); Directing The Robot Vacuum Cleaner To The Base Station; Operating Modes; Selecting The Operating Mode - Miele HS18 Gebrauchsanweisung

en
Manual navigation (without vacuum-
ing)
You can use the direction buttons on
the remote control to direct the robot
vacuum cleaner to a specific area of the
room.
 Press and hold one of the direction
buttons.
The robot vacuum cleaner will travel in
the desired direction without vacuum-
ing.
You cannot direct the robot vacuum
cleaner manually to the base station in
order to recharge it.
Directing the robot vacuum cleaner
to the base station
(only possible when vacuuming was
started from the base station)
 Press the Base button on the remote
control or the Base sensor in the
control field.
The robot vacuum cleaner will travel to
the base station and recharge.

Operating modes

There are 5 operating options:
Auto
Standard vacuuming for
normally soiled flooring.
52
Spot Vacuuming of an area ap-
prox. 1.8 m x 1.8 m around
the selected starting point
of the robot vacuum
cleaner.
Base
Directing the robot vacuum
cleaner to the base station.
Turbo
For vacuuming lightly soiled
flooring with a short vacu-
uming duration.
Silent
Vacuuming with low noise
development.

Selecting the operating mode

 Press the Power button on the re-
mote control.
There are 2 ways of selecting the oper-
ating mode:
Option 1 (Remote control)
 Press the Mode button repeatedly
until the symbol for the operating
mode you want lights up in the con-
trol field.