Use; Switching On And Off; Starting Vacuuming; Finishing Vacuuming If Vacuuming Started From The Base Station - Miele HS18 Gebrauchsanweisung

en
Defining the area to be
vacuumed (Fig. 10)
You can define any areas which the ro-
bot vacuum cleaner should not have
access to.
The robot vacuum cleaner is 85 mm
high.
Any items under which vacuuming is
required should have a minimum
clearance of 87 mm.
 Place the magnetic strip supplied
with the groove facing downwards on
the floor.
The robot vacuum cleaner will not cross
over the magnetic strip.
Adhesive strips are supplied for per-
manent fixing. Additional magnetic
strips are available to order from the
Miele webshop.

Use

Always observe the robot vacuum
cleaner during the first cleaning ses-
sion in a new environment and after
making changes in your home. Re-
move any problematic obstacles or
section off the relevant areas with
the magnetic strip. Check whether
steps and drops in height are recog-
nised properly.
Your robot vacuum cleaner is equipped
with an integrated WiFi module. You
can view status information or execute
control commands using a mobile
device (tablet PC or smartphone).
If you would like to control the robot va-
cuum cleaner using a mobile device,
please read the section "Scout RX2
app".
50
Operation of the robot vacuum cleaner
via remote control and the control field
is described later in this section.

Switching on and off

 Press the Power button on the re-
mote control or any sensor in the
control field.

Starting vacuuming

There are 2 ways to start vacuuming:
Option 1 (Remote control)
 Press the  button.
Option 2 (Control field)
 Press the  sensor.
The area to be vacuumed will be
cleaned.
The robot vacuum cleaner always
cleans for at least 5 minutes, regardless
of the size of the surface to be vacu-
umed.
Finishing vacuuming if vacuuming
started from the base station
The robot vacuum cleaner will return to
the base station and recharge.