Jacobsen HR 9016 Turbo Sicherheits- Und Bedienungshandbuch Seite 17

V. Ignition Switch
The ignition switch has three positions. OFF-RUN
(ON)-START. In the run position the electrical system
is active. Turn to START to crank engine. Always turn
switch to OFF and remove key when leaving
machine.
W. Hydraulic Oil Level Light
Alerts the operator of a low fluid level in
hydraulic tank. See Section 4.4.
NOTICE
The warning light will remain on as long as a low oil
level is detected. The light will come on momentarily
when first starting engine.
X. Cruise Control (Option)
When switched ON the cruise control will lock the
traction pedal in its current position. Cruise will
unlock when switched OFF, or if parking brake is
applied.
Y. Power Take-off Switch
Provides power to cutting units. Mower must be set in
4WD (L) and decks lowered (O) for cutting units to
engage.
Z. 2WD / 4WD Switch - Reverse
Provides momentary 4WD in reverse.
Press and hold switch down to shift into 4WD.
Machine returns to 2 WD when switch is released.
AA.Panel Latch
Used to secure panel in the closed position. Turn
latch to open panel.
CONTROLS
16
4