Installation Option - Carrier 38TYGxxxH7 series Installationsanweisung

38TYG---H7/38TYG---H9
38TYP---H7/38TYP---H9
Minimum Clearances
Minimum Clearances Models- 120H9-140H9
D

Installation Option

Installation without ducts
Attention!!!
It is recommended to install the unit at least 2.30 m above the floor, so that the fan blades are out of reach. If the unit is installed without
ducts at less than 2.30 m above the floor, a protection grille has to be installed at the fan outlets. This grille is available as an accessory.
A
IN
OPTION A
C
OUT OUT
D
A
B
C
D
with ducts
without ducts-Above 2.30m
without ducts below 2.30m-
Install grille at fan outlets
E N G L I S H
mm
300
1500
750
100
GB-8