McQuay A08019028194 Montageanleitung Seite 5

1. Install The Suspension Bolts
Suspension Bolt
Hanger Cover
• Install the suspension bolts so that it can support the indoor
unit.
• Adjust distance to ceiling before installation.
• Refer to the dimension given to install the unit.
2. Install The Indoor Units
Hanger Rod
• Insert the suspension bolts into the fittings of the hanger
bracket.
• Set the nuts and washer on the both side of the metal
fittings.
• Secure it with nuts.
• Attach the hanger cover (4 pieces) to the units.
3. Floor Standing Installation
479.0
78.0
307.4
123.0
Floor
Rear Piping Hole
Hook The Unit On The
Mounting Bracket
• Refer to the dimension as illustrated when installing the
mounting bracket.
• When the rear piping, determine the pipe hose position.
Drill the pipe hole at the slight downward slant to the
outdoor side.
UNDER CEILING INSTALLATION
Suspension
Bolt
Hanger
Cover
Min 547.0 Mounting Bracket
Mounting Bracket
Wall
4. Piping And Drain Hose Installation (Under Ceiling Type)
Rear Piping And Drain Hose
• The piping direction can be 2 ways as illustrated.
• The drain hose is only 1 way.
5. Piping And Drain Hose Installation (Floor Standing Type)
6. How To Install The Drain Hose
Drain Pipe Holder
• Remove the two screws and the drain pipe holder.
• Cut a slit for the drain hose hole.
• Place the drain hose on the v-shape area and secure it
with drain pipe holder and two screws.
3
Upper Piping
OR
Rear Piping Hose
Wall
Piping And Drain Hose
OR
Wall
Piping And Drain Hose
Slit For Drain Hose Hole
Screws