Mixcder E7 Bedienungsanleitung Seite 5

3.Press and hold the power button on the headphone until
it powers on but don't let go just yet. Continue holding
down on the power button until you see the LED indicator
flashes blue and red alternately, which means your
headphone is in "pairing mode"waiting to be paired with
your device. You will hear a prompt.
4.Start Wireless function on your phone and search for new
devices.
5.Select the "Mixcder E7" to pair. Once successfully paired,
the LED turns to solid blue. You will hear a prompt.
5-3 Connecting to paired devices
Mixcder E7 will pair with the last paired device automati-
cally when turning on. Because of different systems, some
computers or laptops may need to be manually paired
every time.
6. Active Noise Canceling
Mixcder E7 contains a noise canceling circuit, Noise mainly in
an airplane, buses or trains is effectively reduced.
1).The noise canceling effect may not be pronounced in a very
quiet environment, or some noise may be heard.
2).The noise canceling effect may vary depending on how you
wear the headphones.
3).The noise canceling function works for noise in the low
frequency band primarily. Although noise is reduced, it is not
canceled completely.
4).When you use the headphones in a train or a car, noise
may occur depending on street conditions.
EN-4