Inhaltsverzeichnis; Safety Precautions - McQuay CC-Serie Installationsanleitung

- Outline And Dimensions (CC series)
- Outline And Dimensions (CK series)
- Outline And Dimensions (CE series)
- Safety Precautions
- Installation Diagram
- Installation Of Indoor Unit
- Electrical Wiring Connection
- Overall Checking
- Service And Maintenance
- Trouble Shooting
Before installing the air conditioner unit, please read the following safety precautions carefully.
• Installation and maintenance should be performed by qualified persons who are familiar with local code and
regulation, and experienced with this type of appliance.
• All field wiring must be installed in accordance with the national wiring regulation.
• Ensure that the rated voltage of the unit corresponds to that of the name plate before commencing wiring work
according to the wiring diagram.
• The unit must be GROUNDED to prevent possible hazard due to insulation failure.
• All electrical wiring must not touch the refrigerant piping or any moving parts of the fan motors.
• Confirm that the unit has been switched OFF before installing or servicing the unit.
DO NOT INSTALL OR USE THE AIR CONDITIONER UNIT IN A LAUNDRY ROOM.
Please take note on the following important points when installing.
• Do not install the unit where leakage of flammable gas may occur.
If water gas leaks and accumulates at the surrounding of the unit, it may cause fire ignition.
• Ensure that the drainage piping is connected properly.
If the drainage piping is not connected properly, it may cause water leakage which will dampen the
furniture.
• Ensure that the unit panel is covered back after service or installation.
Unsecured panel will cause the unit to operate noisily.
CONTENTS

SAFETY PRECAUTIONS

! Warning
IMPORTANT
! Caution
1-2
page 0 i
page 0 i
page 0ii
page 02
page 03
page 04
page 7
page 8
page 8
page 8