Motorola PMLN6481 Bedienungsanleitung Seite 5

Plugging the Connector to the Radio
1. Place the microphone connector as shown in the picture
below.
2. Push the connector into the radio female connector until
a click sound is heard.
Note: The digital symbol on the microphone rubber boot should be
facing to the top while attaching to the radio.
Figure 1. Location of Digital Symbol on microphone connector
Radios with this "Digital Symbol" are digital capable radios
and require the use of accessories with the same "Digital
Symbol". These accessories with the "Digital Symbol" have
been optimized for digital audio Transmit and Receive. Use
of non-approved accessories may result in degradation of
audio quality.
Digital Symbol
Rubber Boot
rubber boot
3