Connecting A Cable To The Bnc Connector; Connecting To A Computer; Placing The Monitor On An Optional Stand - Sony Trinitron PGM-100P1MD Gebrauchsanweisung

Connecting a Cable to the BNC Connector

Insert the BNC plug into
the connector on the
rear, matching the slit
and pin, and turn the
BNC plug clockwise to
secure the connection.

Connecting to a Computer

IBM or compatible computer
to video out
Apple computer

Placing the monitor on an optional stand

By using the SU-556 Monitor Stand (not supplied), the monitor can be tilted and swiveled.
For details on attachment, refer to the instruction manual of the monitor stand.
⁄ ≥ DC OUT
R G B HD VD 0V/1A
¥
Ú
...
Video cable
SMF-400
(not supplied)
to video out
(an adaptor is required.)
Note
Before connecting a computer, see "Important
safeguards/notices for use in the medical
environments" on page 21.
Connect a coaxial cable with the BNC plugs (video
cable) to the BNC connectors on the rear panel as
illustrated.
1
With the computer turned off, attach the coaxial
cable with the BNC plugs (video cable) to the
video output terminals of the computers.
2
With the monitor turned off, attach one end of the
AC power cord to the monitor and the other end
to an AC power outlet. (See page 26.)
27