Location and Function of Parts and Controls
Front Panel
PGM-100P1MD
1
(C TEMP: color temperature) button
Press to show the Color Temperature display on the
screen for the color temperature adjustment.
2
(GEOM: geometry) button
Press to show the Geometry display on the screen for
the picture rotation and pincushion distortion
adjustments.
3
(SIZE: picture size) button
Press to show the Size display on the screen for the
picture size adjustment.
4 s S (CENT: picture location) button
Press to show the Center display on the screen for the
picture location adjustment.
5 ¨ ./> (–/+) (BRIGHTNESS) buttons
• Press to show the Contrast/Brightness display on the
screen for the picture brightness adjustment.
• Press to adjust the picture brightness, picture
location, picture size, picture rotation, and color
temperature.
6 > ?// (–/+) (CONTRAST) buttons
• Press to show the Contrast/Brightness display on the
screen for the picture contrast adjustment.
• Press to adjust the picture contrast, picture location,
picture size, pincushion distortion, and color
temperature.
24
1 2 3 4
C TEMP GEOM
SIZE
CENT
BRIGHTNESS
7
Lights up when the
to the upper position (ON). No operation is possible.
8
Lights up when the power saving function is used.
(See page 30.)
9 u (power) switch and indicator
Turns on or off the monitor.
This power switch is a functional on/off switch only.
To isolate the monitor from the mains supply, turn off
the mains supply switch on the rear panel.
The indicator lights green when the monitor is ready to
operate, and lights orange when it is not ready (with
the main supply switch turned on).
5
6
7 8
CONTRAST
LOCK
POWER
SAVING
(LOCK) indicator
(lock) switch on the rear is set
(POWER SAVING) indicator
9