Techly I-ALARM-KIT001 Installationsanleitung Seite 7

Setup from the control panel
The Alarm System must be set up before using for the first time. During the setup
of the system, the control panel can be powered either by the AC power adapter
or by the backup batteries.
Default codes
- Admin code (necessary to set up your system): 123456
- User code (necessary to disarm your system or stop the alarm): 1234
- Duress code: 1111 (enables you to trigger a duress alarm)
- Open door code: 8888 (enables you to open an electronic door lock plugged to
your control panel)
All access codes can be changed. We recommend you to change these codes
before using your system for the first time.
The control panel of your alarm system features an LCD display that enables you
to navigate through the menu of the control panel and set up your alarm system.
To enter the setting menu, type [your admin code + Enter] on the control panel.
In the table on the next page, each column represents a menu or a sub menu. Each
menu or submenu will be displayed on one of the two lines of the LCD display. On
the LCD display, the current menu, submenu, or setting is shown on the line at
the bottom, while the previous menu or submenu is shown on the line at the top.
Navigate and select the setting you wish to modify with the keys " " or " ", and
enter each menu or sub menu by pressing "Enter".
How to use the keyboard
" " = delete
" " = move forward
" " = move backward
"Enter" = select / confirm
"Esc" = back / previous step in the menu / cancel
The tables on the next pages summarize all the settings that can be accessed and
modified on the control panel.
www.techly.com 7