Techly I-ALARM-KIT001 Installationsanleitung Seite 16

Setup by SMS
IMPORTANT: BEFORE USING FOR THE FIRST TIME
Insert a SIM card in the control panel before starting SMS operations.
Make sure the SIM card does not require any PIN code.
SAVE A SMS NUMBER IN THE CONTROL PANEL (using the control panel).
Only stored numbers can control and configure the system.
(Refer to the instructions page 8)
Each SMS operation defined in this user manual will be illustrated as follows:
You send:
The control panel replies:
Control panel's reply
The system is in English by default. To change the system language, refer to the
instructions on page 22 of this manual.
Important
When replying to the control panel by SMS, make sure no space follows
punctuation marks like "." or ":". For examples, to store SMS numbers, your SMS
must be formatted as follows:
SMS numbers:
1.067890033
2.067890022
3.067890011
4.067890000
5.
16
SMS Command
The first green speech bubble is the
SMS command sent by the user.
The first grey speech bubble is the
reply sent by the control panel.
The speech bubbles that follow are the
dialogue between the user and the
control panel (SMS sent by the user are
in green SMS sent by the control panel
are in grey).
No space after "1."