Techly I-ALARM-KIT001 Installationsanleitung Seite 29

Installation
- Open the case and remove the battery
activation strip.
- Mount the sensor on the door and the magnet
on the door frame.
- Make sure the magnet is placed above the
transmitter.
- Mount the magnet max. 1 cm away from the
transmitter and secure the transmitter and
magnet with double-sided tape or screws.
- Avoid mounting the sensor in areas with a
large amount of metal or electrical wiring
such as a furnace or utility room.
Specifications
Power supply
DC 1.5V (AA 1.5V LR6 battery x 1)
Static current
≤ 30 uA
Alarm current
≤ 40mA
Transmitting distance
≤80 m (in open area)
Radio-frequency
433 MHz (±75 KHz)
Housing material
ABS plastic
Operating conditions
Temperature: -10°C~55°C
Relative humidity: ≤ 80% (non-condensing)
Transmitter dimensions (LxWxH)
71 x 35 x 17.5 mm
Magnet dimensions (LxWxH)
51 x 12 x 13.5 mm
www.techly.com 29