Techly I-ALARM-KIT001 Installationsanleitung Seite 13

Comments
Enter the value (from 1 to 9) and confirm with "Enter".
This function enables you to determine the number of times
the control panel will ring before taking your call (for control
by phone call).
Enter the value (from 1 to 9) and confirm with "Enter".
This function enables you to determine for how long the siren
rings out in case of alarm.
Enter the value (from 0 to 120) and confirm with "Enter".
Default setting is 30 seconds.
Enable / Disable the siren.
Default setting: On
Arm / Disarm silently.
Default setting: On
Enable / Disable the siren.
Default setting: On
Arm / Disarm silently.
Default setting: On
Enable / Disable the siren.
Default setting: On
Arm / Disarm silently.
Default setting: On
When Disarm Upload is on, the system will upload the history
of arm/disarm events to the to the CMS.
When the alarm is triggered, the control panel dials the numbers
you have stored. If you do not disarm the system, the control
panel will call you again (up to 9 times). The "Call Recycle"
function enables you to define the number of times the control
panel attempts to call you. Default setting: 3 times.
Select the language you wish to choose and confirm with
"Enter".
All system settings will be restored to default setting.
Stored phone numbers and connected accessories will be
cleared.
Choose the event log you need to track, press "Enter".
www.techly.com
Note
Wired siren refers to a siren
connected to the control panel
by wire.
Built-in siren refers to the
siren featured in the control
panel.
Wireless siren refers to a siren
connected to the control panel
by radio-frequency.
Languages available may vary
depending on the version of
your product.
The control panel keeps in
record the latest 150 event
logs.
13