Installation - Felisatti TP517/AS Bedienungsanleitung

less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc., in accordance with these instructions and in
the manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed. Use of the power tool for
operations different from intended could result in a
hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualiied
repair person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
4
4.1 PACKAGING
This tool is sold complete with accessories and the
user's manual, contained in a cardboard box (or in a
metal case) of suitable size and thickness for the work
that the tool is intended for. This container should be
kept as it will prove useful for your work.

4.2 INSTALLATION

The environmental conditions, temperature, humidity,
lighting, the correct dislocation of your tool and
the cleanliness of the place of work are important
conditions for personal safety and tool performance.
These factors should always be kept under control
in order to improve working conditions and ensure
safety.
4.3 ELECTRICAL CONNECTION
Before connecting the power tool to the mains
or to the isolation transformer, make sure that it
complies with local norms and that the voltage and
the frequency correspond to those indicated on the
machine data plate.
When using extension leads, make sure that the
cable cross section is suited to the cable length. If
extension leads on reels are used, make sure that
they are completely unwound to avoid the risk of
overheating.
ATTENTION!
The switch on this tool is itted with a locking
device, allowing the tool to be operated for long
periods of time without interruptions.
Before inserting the plug into the socket, check
that the switch is in the unlocked position.
ATTENTION!
When the tool is not to be used for long periods
remember to leave the switch device in the
unlocked position.
4.4 PLACE OF WORK
The tool that you have purchased is a portable electric
power tool.
Only one user should operate this tool, given its
shape, weight and maneuverability.
Normal use requires that both of the operator's hands
are irmly kept on the two handgrips.
INSTALLATION
ATTENTION!
Always keep hands a safe distance away from
the pad!
5
The tool is already regulated according to standard
parameters by the constructor when supplied.
6 OPERATION AND USE
6.1 CONSTANT ELECTRONIC CONTROL
The TP115/350VE machines is equipped with an
electronic circuit that maintains constant motor
revolutions in all working situations, guaranteeing
optimal working conditions.
6.2 APPLICATIONS
As a result of the r.p.m. and constant electronic
control mechanisms, the TP115/350VE is particularly
suitable for metal iller sanding and vehicle bodywork.
6.3 USE AND APPLICATION
The tool is supplied ready for use it is only necessary
to insert the abrasive paper onto the pad.
Pre-punched abrasive paper, or normal paper to
be punched with the paper punch supplied, can be
applied (for the AS models with shavings extraction).
In order to ix the abrasive paper, proceed as follows
(ig. 4-5):
1) Open one ixing clamp and insert the sheet of
abrasive paper into the exact position.
2) Position the sheet of abrasive paper on the base
of the tool.
3) Open the second clamp and insert the other edge
of the sheet of abrasive paper.
Check that the sheet is irmly secured and that it
completely covers the base of the tool.completely
covers the base of the tool.
ATTENTION!
Excessive pressure on the handgrip does not
necessarily result in higher sanding speed, on
the contrary, it can provoke motor overloading
and less eficient operation.
6.4 ABRASIVE PAPER
Only use good quality abrasive paper as this will
improve the sanding eficiency and reduce working
time.
Use coarse grade (40-60-80) sanding sheets for when
large quantities of material require to be removed.
For inishing operations use 150 to 320 grade sanding
sheets.
6.5 SHAVINGS SUCTION UNITS (FIG. 4)
«STARMIX» VCF20/1000, VCF32/1200, VCF45/1400
dust suction units have been designed to keep
working areas clean and free from dust.
Always remember to empty the dus suction bag, it
could ill up and in that way make working operations
less eficient.
Felisatti suction units can also be used for these tools.
REGULATION