Technical Assistance - MO-EL KYOTO-396A Gebrauch Und Wartung

oval marked lamp-holder cover. Be careful not to scratch or force
the plastic (fig. 1a).
2. Gently move the screwdriver to the side as to snap out the cover.
The cover is attached to the bottom of the appliance (fig.2a).
3. Gently pull the cover down while holding one hand near the bot-
tom hinge of the cover. Once opened the cover, turn the lamp 90°
and take it out from the lamp-holder. (fig. 3a/3b)
4. Slide the new lamp in the original position, push it in the lamp-
holders, turn it to 90° until the lamp mark is on the external side
(or internal).
5. Position the top of the cover intro place and close it by pushing us-
ing both hands.
ORDERING REPLACEMENT BULBS
The florescent ultraviolet bulbs in your KYOTO have been designed
for maximum attraction to flying insects. Do not replace original Ultra-
violet fluorescent bulbs with normal lighting bulbs, the wave's length
being different, wil be ineffective in attracting the insects. Original
replacement bulbs are available from your Dealer.

TECHNICAL ASSISTANCE

If you have questions regarding your KYOTO call your Dealer. In case
of breakdown, malfunction or damage turn the device off and take or
send it to the nearest Assistance Center. Repairs must be done by an
authorized Technical Assistance Center using original parts.
11