Fox FLOAT iCD Bedienungsanleitung Seite 6

Figure 8: Mounting Bracket Clearance
3. Tighten the bolts to 10-13 in-lb (1.2-1.5 N-m). Use the included cable tie for securing the lower end of
the battery mounting bracket to the bike frame.
8
mtbservice@ridefox.com
EMAIL
Figure 9: Securing the Bracket with a Cable Tie
Note: On some bike frames it may be possible to anchor the battery bracket with a supplied M4 x 15 mm bolt instead of
using a cable tie. See "Battery Bracket Frame Bolt" for more information.
9
service.ridefox.com
WEB