Panel Installation - McQuay C Serie Installations-Handbuch

Panel Installation

• The front panel can only be fitted in one direction.
• Open the air intake grille by pulling back the catchers and removing it together with filter from panel.
• Install the front frame panel onto the fan coil unit by 4 screws and tighten it completely to prevent cool air leakage.
• Connect the LED wire and air swing wire to the fan coil unit.
From
Front
Panel
NOTE
Install the front frame panel firmly to prevent cool air leakage which will cause condensation and water dripping.
Cool
Air
Good Installation
Air Intake Grille Installation
• Before installing the air intake grille, be sure to fix the
ionizer filter to the air filter.
• Install the air intake grille together with the air filter to
the front panel.
• The grille can be fit in any direction, when selecting
direction, the ceiling design and grille operability should
be considered.
• If the unit comes with ionizer filter (optional item), make
sure to fix the ionizer filter to the air filter before installing
the air intake grille.
• Fix the ionizer filter to the air filter with the black side
on top and white side at bottom.
• Carefully clip on the ionizer filter frame.
Open
LED Wire
Air Swing Wire
Fan Coil Unit
Ceiling Board
Panel
1-5
Screw
Cool
Air
Air Leak
Bad Installation
Frame
Ionizer
Filter
From Control Box
Air Leak
Ceiling Board
Panel