Bartscher 280PRO Original-Gebrauchsanleitung Seite 32

Do not use the device in enclosed areas.
•
Install the device in a well-ventilated room, if possible under the
•
exhaust hood, in order to ensure extraction of all gases created
during combustion. For proper combustion, the air inflow cannot
be lower than 2 m
rating plate attached to the device).
The device may be operated only when it is in good working
•
order and is safe to use. In case of any malfunction, disconnect
the device from the gas supply (close the gas shut-off valve) and
notify the technical service.
Never try to disassemble the device or repair it. Maintenance
•
and repair work may be performed only by the qualified gas
installer, while observing the applicable regulations and using
original spare parts and accessories.
Do not use any accessory or spare parts that have not been
•
recommended by the manufacturer. These can be dangerous
for the user or lead to damages of the device or personal injury,
and further, the warranty expires.
To prevent hazards and to ensure optimum efficiency, no
•
modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.
Before cleaning or maintenance work, as well as a longer
•
interruption in the operation of the device, disconnect the device
form the gas supply (close the gas shut-off valve).
- 28 -
3 /h per kW of rated power of the device (see: