Herunterladen Inhalt Inhalt Diese Seite drucken

Confirming Input Signals From The Vehicle; Accuracy Of The Vehicle Positioning; Driving Environments That Affect The Accuracy Of The Vehicle Positioning - Clarion NAX943DV Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für NAX943DV:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 50
ClarionNavi_English.book 30 ページ 2004年3月19日 金曜日 午後4時18分
Others / Connection diagnosis, Accuracy of vehicle positioning
6
Select the unit that is displayed in yellow
or red.
7
The result of self diagnosis of the unit can
be confirmed.
8
To quit the self diagnosis mode, repeat-
edly press the
TEM START-UP screen is displayed.
Confirming input signals
from the vehicle
The vehicle speed signals, illumination sig-
nals and reverse signals input from the vehi-
cle can be confirmed.
1
button
2
[Connection Diagnosis] key
3
[Vehicle Signals] key
4
The status of input signals from the vehi-
cle will be displayed.
Vehicle Speed
ON is displayed while the vehicle is mov-
ing.
Light
ON is displayed while the clearance/
headlights are illuminated.
E-30
5
Accuracy of vehicle posi-
tioning
Driving environments that
affect the accuracy of the
button until the SYS-
vehicle positioning
In the following cases, the accuracy of the
vehicle icon position in regards to the actual
current location or the accuracy of the direc-
tion of the vehicle icon may become worse.
The accuracy returns to normal as the driv-
ing environment returns to normal.
• There is a similar road near to the road
• When driving on a long, straight road or on
• When driving on a road that is paved with
• When driving on a road with repeating S-
• When driving through a large Y-shaped
• When driving on a circular ramp.
• When driving on a snowy road or unpaved
• When repeatedly turning left or right, or
• Immediately after driving out from a park-
• When driving on a road that is not dis-
Tips:
• If the vehicle is driven immediately after
Reverse
ON is displayed when the shift lever is in
the Reverse position.
To quit the self diagnosis mode, repeat-
edly press the
button until the SYS-
TEM START-UP screen is displayed.
you are driving on.
a continuous, slowly curving road.
stones.
shaped curves.
junction.
road.
driving in zigzags.
ing garage or underground garage.
played on the map, or driving on a road
that was built after the creation of the map
DVD-ROM.
starting the engine, the direction of the
vehicle icon may be misaligned.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis