Volume Adjustment And Muting Of The Voice Guidance; Basic Operations For Searching Locations - Clarion NAX943DV Bedienungsanleitung

ClarionNavi_English.book 8 ページ ２００４年３月１９日 金曜日 午後４時１８分
Read this chapter before using various functions / Volume adjustment and muting of the voice guidance, Basic opera-
tions for searching locations
Volume adjustment and
muting of the voice guid-
ance
1
Press the button.
2
Adjust the volume.
<Operation with the remote control>
Select the [Guidance Volume] key, and
adjust the volume by tilting the joystick to
the left or right.
Turn up the volume: Right
Turn down the volume: Left
<Operation with the touch panel>
Touch the [Quieter] or [Louder] key.
(1) [Quieter] key
(2) [Louder] key
(3) [Guidance Volume] key
3
Muting the voice guidance
Select the [Guidance Volume] key to turn
off the indicator light.
Switch Beep setting
⇒[Navigation]⇒[Switch Beep]⇒[Οn]
or [Off]
Basic operations for
searching locations
Confirmation and adjustment of the
destination (waypoints)
A list similar to the one shown below will be
displayed after searching locations by the
Address Book, Previous Dest., Intersection,
Point of Interest (POI), or City Centre
E-8
For the items described in the "Notes for set-
ting a destination (waypoints)", select the
[Map] key to display the map, and confirm or
adjust the destination as necessary.
The destination calculated by the system
may not be at the exact location you speci-
fied. Please adjust the destination as neces-
sary.
Notes for setting a destination
(waypoints)
A few notes for setting a destination (way-
points) are described below. Incorrect setting
can lead to incorrect route guidance.
• Be especially careful when you specify a
road in which inbound and outbound
lanes are completely separate, such as
interchanges, rest areas, etc. If an incor-
rect lane is set, the shortest route to your
destination may not be suggested.
In this case, adjust the destination (way-
points) by scrolling the cross pointer on
the map, while taking into consideration
the direction that you are travelling, your
destination, etc.
• If a destination is set where a toll road
crosses over or runs above an ordinary
road, only a route to a location on the toll
road near to the destination may be sug-
gested.
In this case, scroll the cross pointer on
the map to a point on the desired ordinary