Operation; Check Tire Pressure; Safety Interlock System Tests; Oil Recommendations - Snapper RDLT Serie Bedienungsanleitung

Safety Interlock System Tests

This unit is equipped with safety interlock switches and
other safety devices. These safety systems are present for
your safety: do not attempt to bypass safety switches, and
never tamper with safety devices.
WARNING
If the unit does not pass a safety test, do not oper-
ate it. See an authorized dealer.
Test 1 — Engine should NOT crank if:
• PTO sw8t27 8s ON, OR
• Br0k4 p430l 8s NOT 5ully 34pr4ss43 p0rk8n6 1r0k4
OFF), OR
• T74 2ru8s4 2ontrol l4v4r 8s NOT 8n NEUTRAL.
Test 2 — Engine SHOUlD crank and start if:
• Op4r0tor 8s s8tt8n6 8n s40t, AND.
• PTO sw8t27 8s OFF, AND
• Br0k4 p430l 8s 5ully 34pr4ss43 p0rk8n6 1r0k4 ON ,
AND
• T74 2ru8s4 2ontrol l4v4r 8s 8n NEUTRAL.
Test 3 — Engine should SHUT OFF if:
• Op4r0tor r8s4s of s40t.
• Coll42tor 8s not 2los43 w74n 4n6068n6 PTO sw8t27.
Test 4 — Check Mower Blade Stopping Time
Mower blades and mower drive belt should come to a
2ompl4t4 stop w8t78n iv4 s42on3s 05t4r 4l42tr82 PTO
switch is turned OFF. If mower drive belt does not stop
w8t78n iv4 s42on3s, s44 0n 0ut7or8z43 340l4r.
Test 5 — Check Reverse Mow Option (RMO)
• En68n4 s7oul3 s7ut of 85 r4v4rs4 tr0v4l 8s 0tt4mpt43 85
the PTO has been switched on and RMO has not been
activated.
• RMO l867t s7oul3 8llum8n0t4 w74n RMO 70s 144n 02t8-
vated.
WARNING
Mowing in reverse can be hazardous to bystand-
ers. Tragic accidents can occur if the operator is not alert
to the presence of children. Never activate the RMO if
children are present. Children are often attracted to the unit
and the mowing activity.
en

Check Tire Pressure

Tires should be checked periodically to provide the
optimum traction and to guarantee the best cut (see
Figure 3).
NOTE: Th)s) pr)ssur)s may (if)r slightly from th)
Maximum Inlation stamp)( on th) si() walls of th) tir)s.
Size
15 x 6,0
20 x 8,0

Oil Recommendations

We recommend the use of Briggs & Stratton Warranty
C4rt8i43 o8ls 5or 14st p4r5orm0n24. Ot74r 7867-qu0l8ty 34-
t4r64nt o8ls 0r4 0224pt01l4 85 2l0ss8i43 5or s4rv824 SF, Sì,
SH, SJ or higher. Do not use special additives.
Outdoor temperatures determine the proper oil viscosity for
the engine. Use the chart to select the best viscosity for the
outdoor temperature range expected.
* Below 40°F (4°C) the use of SAE 30 will result in hard starting.
** Above 80°F (27°C) the use of 10W-30 may cause increased oil
consumption. Check oil level more frequently.

Operation

PSI bar
14 0,96
10 0,68
Figure 3
19