Assembly; Safety Devices - HERKULES 3500 POWER Bedienungsanleitung

Bedienungsanleitung / Owner Manual 3500 Power

Assembly

1. Be sure that all necessary parts for the
assembly are present.
2. At first install the axis and the fenders on
the rear side under the machine.
3. The fenders are shifted between the arrester
for the screws on the upper side and the
frame of the device.
4. Attach the wheels to the axis. Secure this
with the split-pins.
5. Install the feets and the rear tunnel at the
cutting-unit side of the machine. Do not
forget to install the cross-beam between the
feets.
Herkules Motorgeräte
6. Attach the front throw-off-channel.
needed screws are in the enclosed package.
7. Unfasten the Safety-Screw at the right side
of the machine. Remove the safety covering
and attach the side hopper at this point.
8. Put the square spanner for tensing the v-belt
in the holding fixture at the right side.

Safety devices

1. Safety-Screw at the V-belt guard
2. Safety-Screw at the side-hopper
3. Flap cap for the side hopper which has to be
attached when side-hopper is not in use.
4. Rubber-guards in both hoppers
5. Lateral at the main hopper is a push rod to
support the filling with organic material.
We expressly point out that no changes to
the safety devices of the machine
are allowed.
www.herkules-garten.de
13
The