Short Branches Up To 20 Cm; Branches Over 20 Cm Length; Opening The Machine - HERKULES 3500 POWER Bedienungsanleitung

Bedienungsanleitung / Owner Manual 3500 Power

Short branches up to 20 cm

1. Short branches up to 20cm can be supplied
in the main hopper. If you feed branches
longer than 20cm in the main hopper
serious accidents can result.
2. To support the feed only the usage of the
push rod is allowed!
It is to be ensured that enough open space
3.
remains below the throw-off to avoid a
backflow.

Branches over 20 cm length

1. Branches and all other material over 20cm
lengh have to be supplied in the side-
hopper.
2. Thicker branches are feeded individually and
cautiously over the side-hopper so that the
engine speed does not drop too far. Always
the thicker end of the branches ahead.
3. It is to be ensured that enough open space
remains below the throw-off to avoid a
backflow.
Herkules Motorgeräte

Opening the machine

1. Bolt cutting screen
2. Bolt level screen
3. Tension for v-belt
4. Turning-device for cutting-screen
1. Remove bolt cutting screen
•
2. Turn down cutting-screen
•
Remove bolt level screen
•
• Remove safety-screw
Open V-belt cover
•
• Release V-belt
Remove V-belt
•
www.herkules-garten.de
16