Installation Instructions - Thermalright AXP-200 Muscle Handbuch

Installation Instructions:

Step 1:
1
Step 1 : Install the four screw pillars.
Take one M3L10 screw and put one washer for Intel around the screw pillar. Snap it through one of
holes around CPU socket from bottom towards top. Cap the screw pillar with the screw nut included and
then tighten up. Now repeat this installation for the other three screw pillars in a criss-cross pattern.
Step 2:
Step 2 : Place the Anchoring Mount on the Screw Nuts.
Step 3:
Step 3 : Applying Thermal Paste
Apply the Chill Factor to the base of the Heatsink and the surface of the CPU evenly.
3
4
2
3