Installation Instructions - Thermalright Silver Arrow ITX-R Handbuch

Installation Instructions:

Step 1:
Step 1 : Back Plate Installation
Choose the platform (LGA 775/1150/1151/1155/1156/1366) you are in use. Make four M3L10 Screw
the Metal Back Plate+Mylar on the table. Put the four Washers (for Intel) around the Screw Pillars.
Step 2:
Step 2 : 775 Back Plate Cap
Note: When installing on a LGA775 platform,
please first insert the Back Plate Cap into the
opening on the Back plate. Make sure you have
the Cap facing downwards. (Only for LGA775,
not applicable to LGA 1150/1155/1156/1366).
Step 4:
1
Step 4 : Anchoring Mount Installation
Anchoring Mount InstallationPlace the Anchoring
Mount on the Screw Nuts. Use the four M3L6
Nuts
on a criss cross pattern.
3
4
2
3
1366 1366
775 775
Step 3:
1
Step 3 : Screw Cylinder Installation
Place the motherboard on top of the Back Plate.
See the four Screw Cylinders go through the four
holes around the processor socket. Cap the four
Screw Cylinders with the four Screw Nuts on a
criss cross pattern. Make sure the side with a
washer is facing the Back Plate.
Step 5:
Step 5 : Applying Thermal Paste
Apply the Chill Factor III to the base of the
Heatsink and the surface of the CPU evenly.
115x
4
2
3