Conversion To A Different Type Of Gas - Kaiser HGE 9-Serie Gebrauchsanweisung

1
26

CONVERSION TO A DIFFERENT TYPE OF GAS

Before converting the appliance for operation with a
different gas type, check which type of gas it is
currently set to operate with (adhesive label on
appliance).
For the correct nozzle diameter, refer to the relative
table in this booklet.
Conversion to a different gas type must be carried out
by qualified technicians and in conformance with the
requirements.
Conversion procedure:
2
3
EN

Disconnect the electrical power supply to the
appliance,

Turn the knobs in the null position.
Replace the nozzles 1 with the corresponding

type of gas to be used (see table «Nozzle
table»).

To adjust to the minimum, light the fire und turn
the knob 2 in the position of minimal flame, then
remove the knob of gas submission.

Use a screwdriver on the screw placed on the
tap 3.

For LPG (butane/propane) screw tight the tap.