HP LaserJet 5100 Handbuch Seite 10

Step 1 Replace the transfer roller
CAUTION When removing screws in the printer, use a magnetic screwdriver.
Using a magnetic screwdriver can help to prevent screws from falling
inside the printer, where they might damage the printer.
1
2
Figure 2 Removing the metal plate
8
Installing the printer maintenance kit
Face the front of the printer, open the top cover, and lift the small
green handle on the right side of the registration assembly,
exposing the metal plate that rests against the transfer roller
(Figure 2, item 2).
While holding the green handle, remove the two self-tapping
screws (item 1), and then carefully lift out the transfer guide.
ENWW