Inhaltsverzeichnis
Werbung
INSTALLATION
MINIMUM SYSTEM REQUIREMENTS
Your computer should meet the following minimum requirements:
• PC-type computer
• PC complying with IEC 60950
• Pentium III – 500 MHz processor
• 20 GB hard disk
• 512 MB RAM internal storage
• Windows 2000 Pro SP4 / XP Pro SP1 / Vista Business Edition
• DirectX 9 compatible
• USB 2.0 hi-speed port (Intel or NEC chip set)
• 32 MB RAM video controller (not shared)
• Screen resolution: 1024 x 768
MOUNTING THE HANDPIECE HOLDER
1. Choose a convenient area that is easily
accessible.
2. Use the alcohol wipe provided to clean the
surface on which you are going to fasten the
holder.
3. Remove the adhesive protection tape that is
on the holder, and place the holder. Press
the holder several times to correctly fix the
holder to the surface. After fastening the
holder to a surface, wait at least two hours
for the adhesive to set before positioning the
SuniCam II in the holder.
CAUTION: The holder is equipped with magnets that can
damage devices sensitive to magnetic fields. Make sure
you do not mount the holder near such devices (CRT
displays, magnetic videotapes, etc.).
Placing the camera in the holder deactivates its functionality when not
in use. The handpiece holder is also intended to maintain the cable to
handpiece connector when the cable is not linked to the handpiece.
CONNECTING TO A COMPUTER
DOCK USB2 CONNECTION
• The USB cable is connected between the USB
Dock and one of the computer's USB 2.0
ports.
• The connecting cable is connected between
the USB Dock and the handpiece.
support@suni.com
11
Werbung
Inhaltsverzeichnis
