Care And Cleaning; Cleaning The Filters; External Cleaning; Internal Cleaning - Electrolux ESL2460W Benutzerinformation

58 www.electrolux.com

9. CARE AND CLEANING

WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains socket.

9.1 Cleaning the filters

9.2 Cleaning the spray arm

9.3 External cleaning

Clean the appliance with a moist soft
cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.

10. TROUBLESHOOTING

The appliance does not start or it stops
during operation.
A
B
Dirty filters and clogged spray arm
decrease the washing results.
Make a check regularly and, if
necessary, clean them.
1. Turn the filter (A) counterclock-
wise and remove it.
2. Remove the filter (B).
3. Wash the filters with water.
4. Before you put the filter (B)
back, make sure that there are
no residues of food or soil in or
around the edge of the sump.
5. Put the filter (A) into position in
filter (B). Turn it clockwise until
it locks.
An incorrect position of the
filters can cause bad
washing results and dam-
age to the appliance.
1. Turn the nut counterclockwise.
2. Remove the spray arm.
3. Clean the holes.
If the holes in the spray arm are clogged,
remove remaining parts of soil with a thin
pointed object.

9.4 Internal cleaning

If you regularly use short duration pro-
grammes, these can leave deposits of
grease and limescale inside the appliance.
To prevent this, we recommend to run
long duration programmes at least 2
times per month.
Before you contact the Service, refer to
the information that follows for a solution
to the problem.