Before First Use; Electronic Adjustment - Electrolux ESL2460W Benutzerinformation

• The programme is completed.
• The level of the water softener is adjus-
ted electronically.
• The appliance has a malfunction.
Factory setting: On.
It is possible to deactivate the
acoustic signals.
Deactivating the acoustic signals
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to 'Set-
ting and starting a programme'.
2. Press and hold function buttons (B)
and (C) at the same time until the indi-
cators of function buttons (A), (B) and
(C) start to flash.

6. BEFORE FIRST USE

1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
6.1 Adjusting the water softener
German
degrees
(°dH)
> 24
18- 24
12- 18
4 - 12
1) Factory position.
2) Do not use salt at this level.

Electronic adjustment

1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to 'Set-
ting and starting a programme'.
French
degrees
32 - 40
19 - 32
7 - 19
< 4
3. Press function button (C),
4. Press function button (C) to change
5. Deactivate the appliance to confirm
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
Water hardness
mmol/l
(°fH)
> 40 > 4.2
3.2 - 4.2
2.1 - 3.2
0.7 - 2.1
< 7 < 0.7
2. Press and hold function buttons (B)
3. Press function button (A).
• The indicators of function buttons
(A) and (B) go off.
• The indicator of function button (C)
continues to flash.
• The display shows the current set-
ting of the acoustic signals.
On
Off
the setting.
the setting.
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
Clarke
degrees
28
22 - 28
13 - 22
5 - 13
< 5
and (C) at the same time until the indi-
cators of function buttons (A), (B) and
(C) start to flash.
ENGLISH 53
Elec-
tronic
adjust-
ment
5
4
1)
3
2
2)
1