Close The Washer Door And Press The Start/Stop Button; Once The Program Has Finished - grandimpianti GH6 Bedienungsanleitung

www.groupdynamics-laundry.com
sales@groupdynamics.lv
Washing
6
Close the washer door and
press the Start/Stop button
Time remaining
"Programme started" is shown on the display.
The time remaining is shown in hours and
minutes. Once a programme is selected, the
estimated programme time is displayed. This may
differ from time to time depending on the
temperature of the water entering the machine
and the size of the load. If the programme time is
longer than the previous wash with the same
programme, "0:01" will be displayed until the
programme finishes. This is normal!
To add or remove washing after the
program starts
If you want to add or remove items after the
programme has started, you can stop the
programme by pressing and holding the Door
opening button (key symbol) for three seconds.
When you restart the machine, add any extra
detergent needed and close the washer door. The
machine continues automatically from the point
where the programme was interrupted.
Stopping or changing a programme
You can stop a programme by pressing the
Start/Stop button for three seconds. "Stop"
appears in the display. To restart the machine,
select a new programme, add any extra detergent
needed and press the Start/Stop button.
Note!
Do not open the detergent compartment while
the machine is running.
12
7

Once the program has finished

Once a programme has finished, "End"
appears on the display.
The washer door opens automatically once the
programme has finished. If you want to deactivate
the automatic door opening function, see the
"Selecting settings" section.
• Remove the load.
• Turn off the main power switch, this will
save energy.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
Backlighting
Two minutes after the wash programme finishes
the display backlighting enters energy saving
mode.