System Set-Up - Sens Sensear SM1X Bedienungsanleitung

SYSTEM SET-UP

The Sensear SM1, SM1x and SM1x SR models
are confi gured by using System Set-up, in which
the following functions are available:
Activating the System Set-up
•
Press and hold down the "Volume Up" button
for one second. A message will be heard
when the System Set-up is activated.
De-activating the System Set-up
• Press and hold down the "Volume Up" button
for one second. Alternatively, the System
Set-up will be exited nine seconds after the
last button press. A message will be heard
when the user has exited the System Set-
up.
Navigating to the next option in the
System Set-up
• Press and release the "Power" button.
Changing options in the System Set-up
• Press and release the "Volume Up" button
or the "Volume Down" button, depending on
the option required.
The order of System Set-up options available
to the user is shown below.
Battery Status
Press and release "Volume Up" or "Volume Down"
Advises the battery status
External Audio Pass Through Options
Press and release "Volume Up"; Enables the
external audio passthrough. Press and release
"Volume Down"; Disables the external audio
passthrough
Bluetooth Options (SM1x(SR) only)
Press and release "Volume Up"; Enables Bluetooth.
Press and release "Volume Down";
Disables Bluetooth (Suitable for aircraft use, etc)
Communications Options
Press and release "Volume Up" or "Volume Down";
Navigates through and enables 2-way Radio, Wired
Communications OR Short Range FM.
Wired Communications Level
Press and release "Volume Up" or "Volume Down";
Navigates through and selects Low, Medium OR
High. This selects the level of Audio transmitted
Default level is set to Low.
Battery Status
Extend Audio Pass-
through Options
Bluetooth Options
Communications
Wired Communications
Options
Wired Com-
2-way Radio
munications Level
FM Radio Options
VOX Options
Volume Balance
Options
Restore Factory
Defaults
Short Range FM Frequency (SM1x SR only)
Press and release "Volume Up" or "Volume Down";
Navigates through and selects the frequency for
Short Range FM Communication
Short Range FM Region (SM1x SR only)
Press and release "Volume Up" or "Volume
Down""; Navigates through and selects Region 1,
2 OR 3.
FM Radio Options (FM And SR models only)
Press and release "Volume Up"; Enables the FM
Radio. Press and release "Volume Down"; Disables
the FM Radio
VOX Options (if Boom Mic installed)
Press and release "Volume Up"; VOX Enabled
Press "Volume Down"; VOX Disabled
Volume Balance Options
Press and release "Volume Up"; Increases left ear
volume relative to the right. Press "Volume Down";
Increases right ear volume relative to the left.
Restore Factory Defaults
Press and release "Volume Up"; Restores factory
defaults. The user will be asked to confi rm by
pressing and releasing "Volume Up" again. If
confi rmed, factory settings are restored and a
message is played and the system will shut down
Press "Volume Down"; Cancels restoring factory
defaults.
12
Short Range FM
Short Range FM
Frequency
Short Range
FM Region