SmartStart
If you have activated the
function in Settings, instead of
,
will appear in the display
at
SmartFinish
when you press the Delay start button.
Setting the timeframe
You can define a period (from 15
minutes to 24 hours), in which the wash
programme must be started.
The procedure for setting this is the
same as for setting the time for Delay
start.
Use the and sensors to enter the
hour and confirm your entry with the
OK sensor.
The hours will be saved and the minute
number block will be highlighted.
Use the and sensors to enter the
minutes and confirm your entry with
the OK sensor.
Press the Start/Stop button to start
the wash programme with
SmartStart.
en - T1 and W1 with 4 line display
SmartGrid
Finish
The following will appear in the display:
Tumble dryers
Cottons
SmartStart until
Normal
Washing machines
Cottons
The selected programme will start auto-
matically, as soon as the energy pro-
vider has sent the signal, or the latest
calculated start time has been reached.
The procedure for changing or deleting
the SmartStart function is the same as
described for the Delay start function.
10:00
15:00
10:30
11:46
Start at
1600 rpm
37