Vacuum Cleaner Description; Labels; Optional Kits - Nilfisk-ALTO ATTIX 170 Betriebsanleitung

ATTIX 170 / ATTIX 170 E

Labels

1 Identification plate
Code of the model which includes the class (L, M, H),
technical specifications, serial number, CE marking, year
of manufacture.
2 Attention plate
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is off.
Failing this, the shaking would have no effect while the
filter itself could be damaged.
3 Warning label
(For L, M, H version)
4 Exhaust
5 Control and check panel
(For L, M, H versions)
6
HEPA filter container
(For L, M, H version)
7 Filtering chamber
8 Inlet
9 Inlet plug
10 Dust container
11 Panel power plate
1 Class L label
2 Class M label
3 Class H label
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (8, Fig. 1) and blows out through the
exhaust (4, Fig. 1). After the hose and tools have been fitted,
make sure that the motor turns correctly.
I
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet and then fit the required tool on to the end part.
GB
Refer to the manufacturer's accessory catalogue or Service
Centre.
F
D
E
C328

Vacuum cleaner description

Figure 1
Figure 2
The diameters of the authorised hoses are given in the
technical specifications table.
This vacuum cleaner is equipped with an internal baffle
plate which subjects the vacuumed substances to a circular
centrifugal movement that makes them drop into the
container.
The vacuum cleaner is equipped with a primary filter which
enables it to be used for the majority of applications.
Several types of primary filters are available: L and M class for
dust harmful to health.
Besides the main filter which retains the more common types
of dust, the vacuum cleaner can be fitted with a HEPA filter at
the intake and/or exhaust side, with a higher filtering capacity
for fine dust and substances harmful for the health.

Optional kits

Various optional kits are available for converting the vacuum
cleaner:
■ Removable separator
■ Clamp and bracket
■ Downstream HEPA filter
■ Grill and depressor
■ Grid
■ Cartridge filter
Electric filter shaker
■
On request, the vacuum cleaner can be supplied with optional
kits already installed. However, they can also be installed at a
later date.
Please contact the manufacturer's sales network for further
details.
Instructions to install parts on request are included in the
conversion kit.
WARNING!
Use only supplied and authorized genuine spare parts.
4
11/2008