Manitou BT 420 3-E2 series Reparaturanleitung Seite 118

REASSEMBLY OF THE TELESCOPING CYLINDER
- Reassemble by carrying out in reverse order the operations described in the chapter "REMOVAL
OF THE TELESCOPing CYLINDER", also complying with the following instructions.
Fig. E
- Clean the articulation axles (item. 6 Fig. E) before reassembling and apply a thin layer of
grease (See chapter: CHARACTERISTICS OF THE LIFT TRUCK in group 0 - GENERAL).
- Also clean and grease the articulations (Item. 7 Fig. E) with the same grease.
6
7
6
19
7